Mitel SX-200 Practices page 207

Features
To Set Up or Modify Forwarding:
l
With the handset on-hook, press the PROGRAM feature key.
l
Press the CALL FWD feature key.
The alphanumeric display shows a Forwarding type. If the displayed type is
not the one required, press the NO softkey; another type is displayed; select
type of forwarding, then press the YES softkey.
l
Dial the forwarding destination.
or
;
l
Press the SPEED CALL key associated with that number or dial the
Abbreviated Dial number, if available.
l
Check the number on the display.
- To correct an error, use the 4 key.
9 Press the SAVE softkey when the correct destination is displayed.
SUPERSET
DN Telephones:
To display the current forwarding type and destination:
l
Press
SuperKey.
l
Find the
Forwarding
softkey. (Use the More softkey).
l
Press the
Forwarding
softkey. The display shows the current forward-
ing type and destination, if programmed.
l
Press
SuperKey
to return to normal display.
To activate Forwarding already programmed:
l
Press the
Turn FWD On
softkey. cFWD ON> appears in the upper
right corner of the LCD.
To deactivate Forwarding:
l
Press the
Turn FWD Off
softkey. cFWD ON> disappears from the dis-
play
To Set Up Forwarding:
0 Press
SuperKey.
l
Find the
Forwarding
softkey. (Use the
More
softkey).
l
Press the
Forwarding
softkey. The display shows the current fowvard-
ing type and destination, if programmed.
. Press the
Change
softkey. Softkeys appear for the types of forwarding
enabled in the set' s COS.
l
Select type of forwarding desired; the display requests the destination
number.
9109-096-l 05-NA
Issue 1
Revision 0 105 2-135