Call Forwarding - Generic 1001, 1002, And 1003 - Mitel SX-200 Practices

Features
Call Forwarding - Generic 1001, 1002, and 1003
Description
Call Forwarding allows the telephone user to redirect calls placed to the
telephone' s extension number. The calls can be redirected to many types
of devices and external numbers. The type of forwarding selected deter-
mines under what conditions the call is redirected. Call Forwarding
destinations are internal to the PABX, except Call Forwarding - External.
The types are:
l
Call Forwarding - Busy (When Set' s Busy)
;
l
Call Forwarding - Busy/Don' t Answer (Busy/No Answer)
l
Call Forwarding - Follow Me (Always Forward)
9 Call Forwarding - I' m Here
e Call Forwarding - Don' t Answer (When No Answer)
l
Call Forwarding - External.
Conditions The following conditions apply to this feature:
.
.
.
.
_
.
Forwarding cannot be programmed from an extension to itself.
9109-096-I 05-NA
Issue
1
Valid call forwarding destinations are: Dial 0 access code, hunt groups
(not data type), industry-standard telephones, SUPERSET tele-
phones, consoles, ACD Paths, personal Speedcall keys, system
Abbreviated Dial numbers.
For Call Forwarding, an extension is considered BUSY if the extension
is not idle; has its prime line appearance not idle, or the device is
otherwise in use or unavailable (in Do Not Disturb or out of service).
The exception is a subattendant position which has at least one idle
multicall appearance of itself.
Forwarding is operational for logical lines if the line is a single appear-
ance line. The forwarding setting of the SUPERSETtelephone where
the line is programmed is used to forward calls.
Forwarding can be set up to the Dial 0 access code. The destination is
translated from the access code to the routing point based upon the
current NIGHT/DAY service at the time of forwarding (giving NIGHT/
DAY based forwarding). Priority Dial 0 can be used as well, with the
feature being checked for on the forwarding extension.
Forwarding does not apply if the calling extension is the party to which
the call would be forwarded.
Forwarding does not apply if the forwardee has COS Option 234 (Nev-
er a Forwardee) in its COS.
Forwarding directly to an LDN can only be set up by an Attendant. An
extension can set up forwarding to an LDN indirectly by using the Dial
0 code.
Revision
0 105 2-115