Mitel SX-200 Practices page 243

Features
Data: Abbreviated Dial for ADL Calls
Description
Cond%ions
Programming
Operation To originate an Abbreviated Dial call:
An ADL user can originate an ADL call using a System Abbreviated Dial
number.
This feature is not available in Generic 1001.
Reorder tone is returned if the user enters an invalid Abbreviated Dial
number.
;
Enable COS Option 245 (Abbreviated Dialing Access) in the Class of Ser-
vice for the associated voice line.
Assign an access code to Feature 24 (Abbreviated Dial Access) in CDE
Form 02 (Feature Access Codes).
Enter the desired Abbreviated Dial numbers into CDE Form 31 (System
Abbreviated Dial Entry), or enter them from the Attendant Console. See
Attendant Abbreviated Dial Number Entry.
l
If the Abbreviated Dial number entry does not include the ADL access
code, dial the ADL access code.
l
Dial the Abbreviated Dial access code.
l
Dial the desired Abbreviated Dial number (one to three digits).
l
Hang up when connect tone is heard. The call is transferred to the as-
sociated dataset.
See also
ADL Call originate
in this Section.
Data: Associated Modem Line (AML)
Description
This feature allows voice only calls, data only calls, simultaneous voice/
data calls, and alternating voice/data calls through the SX-200 DIGITAL
PABX. A standard ONS voice port is associated with one or more
SUPERSET 4, SUPERSET
4
DN, SUPERSET 410,
SUPERSET 420
or
SUPERSET 430
telephones through CDE programming. This ONS port is
connected to data terminal equipment (DTE) via a modem. Data calls are
set up using the associated telephone.
This feature is not available in Generic 1001.