Mitel SX-200 Practices page 739

Programming Hotel/Motel
Chart 4-10 Programming Attendant Automatic Wakeup
dotes: 1. If a guest room telephone is programmed for Automatic Wakeup Routing, the Automatic
Wakeup Music option has no effect.
2. System Options 12 (Automatic Wakeup Alarm) and 13 (Automatic Wakeup Print) have
no effect on SUPERSET 4, SUPERSET 420, SUPERSET 4DN and SUPERSET
430 telephone operation of the feature.
3. Recorded announcements are provided through recording hunt groups.
;
4. System Option 13 to print changes to wakeup status can be enabied. This causes a
SET BY CON or CHG BY CON message (attendant console) or a SET BY DESK or
CHG BY DESK (front desk terminal) to be printed to indicate how the change was
made.
5. A printer must be assigned to the "Hotel/Motel Wakeup" printout type in CDE Form 34
(Directed IO) for the status messages for wakeup activity. Audits of wakeups from the
console are directed to the Hotel/Motel Audii printer.
Enable COS option 101 (Attendant O/G
Restritiion/Room Status Setup) for the
Enable COS option 202 (Alarm Call) and
COS option 244 (Room Status Applies) for
the extension.
Form 04: Optional.
Select System Option 12 (Automatic
Wakeup Alarm) to allow the console alarm
icon to be flashed, in the event that a
wakeup call is not answered within three
attempts. This also generates a
Described in Note 4.
'. .
9109-096-602-NA
Issue 1 Revision 0 602 4-19