Mitel SX-200 Practices page 199

Features
To activate Forwarding already programmed:
l
Press the
Turn FWD On
softkey. cFWD ON> appears in the upper
right corner of the LCD.
To deactivate Forwarding:
l
Press the
Turn FWD Off
softkey. &VVD ON> disappears from the dis-
play.
To Set Up Forwarding:
Press
SuperKey.
;
Find the
Forwarding
softkey. (Use the More softkey).
Press the
Forwarding
softkey. The display shows the current forward-
ing type and destination, if programmed.
Press the
Change
softkey. Softkeys appear for the types of forwarding
enabled in the sets COS.
Select
Always.
The display requests the destination number.
Enter the destination number. If an invalid number is entered, the dis-
play shows INVALID NUMBER. Use the 4- softkey to back space
and erase the entry. Enter the correct number (can be a speedcall key,
if programmed) or press the
Current No.
softkey to restore the pre-
viously programmed destination, (if available).
Press the
Save/On
softkey. The display returns to normal. &VVD ON>
appears in the top right corner.
Call Forwarding - I' m Here Generic
1001,1002and1003
Description
.
Conditions
Programming
This type of forwarding operates the same as Forwarding - Follow Me,
but it is activated from another extension. All calls are forwarded to the
new location. The forwarded extension can originate calls in the normal
manner.
See conditions for Call Forwarding - Generic 1001, Generic 1002, and
Generic 1003.
Enable COS Option 209 (Call Forwarding - Follow Me) in the extension' s
cos.
Ensure Feature Access Code 07 (Call Forwarding - I' m Here) has a feature
access code programmed.
9109-09&105-NA Issue1
Revision
0 105 2-127