Mitel SX-200 Practices page 722

Hotel/Motel Feature Package Description
Note:
This information is in addition to the programming required for the SX-ZU0 DIGITAL
PABX.
Chart 4-l Programming the Hotel/Motel Application
Rep
Action Comments
Form 02: Program System Access Codes Access codes can range from one to fiie
digits.
1.
Set Access Code for Do Not Disturb.
Assign an access code for Do Not Disturb.
COS option 220 on Form 03 must also be
set.
The same access code sets and cancels Do
Not Disturb at a guest room telephone.
Set Access Code for Automatic Wakeup
COS options 202 and 244 on Form 03 and
for Room Phones,
Assign a one to System Option 11 on Form 04 must also be
fiv+digit code for Feature 32, Automatic
set.
Wakeup.
Set Access Code for Maid in Room Feature.
Assign a code for Feature 35, Maid in Maid in Room allows the maid to dial a
Room.
telephone number when they enter a room
for housekeeping and dial another number
when they have finished the room.
Set Access Code for
SUPERSET
telephone Room Status Display.
Assign a
code for Feature 36, SUPERS= 4 Room
SUPERSET 4 Set Room Status Display
TelephoneStatus Display.
allows an authorized SUPERSET4,
SUPERSET420, SUPERSET4DN and
SUPERSET 430 telephone to display the
status of guest rooms. The Room Status
parameters are:Vacant or Occupied or
Reserved; Clean or Dirty or Out of Service
or To Be Inspected .
Set Access Code for SUPERSET 4
Telephone Maid in Room Status Display. SUPERSET 4 Telephone Maid in Room
Assign a code for Feature 40, SUPERSET Status Display allows an authorized
Telephone Maid in Room Status.
SUPERSE7- 4, SUPERSET 420,
SUPERSET 4DN and SUPERSET 430
telephone to determine which guest rooms
have maids in them.This feature is not
available with Generic 1002.
Set access code for retrieving a message
from a telephone.
Assign a code for Feature 42, Call
Message Sender of Oldest Message.
Allows a guest room telephone to call the
attendant to retrieve a message.
Page 1 of 9
602 4-2
Revision 0
9109-096-602-NA
Issue 1