Mitel SX-200 Practices page 756

Hotel/Motel Feature Package Description
Automatic Wakeup
Feature Description: Reference pages 602 2-32 to 602 2-35.
Programming: Reference Chart 4-6 to Chart 4-l 0.
Operation:
Chaft 6-4 Setting Automatic Wakeup
1.
2.
3.
4.
5.
6.
7.
6.
Press FUNCTION.
Press the GUEST ROOM softkey.
Enter the extension (room) number.
Press the SET WAKEUP softkey.
Enter the wakeup time.
If the wakeup time is in the morning, press the
SET softkey.
If the wakeup time is in the afternoon, press the
PM softkey .
When you are finished, press the EXIT softkey.
;
The SEr WAKEUP softkey appears.
The prompt to enter wakeup time
appears.
When a valid wakeup time is dialed,
the softkeys change.
Notes: 1. To set wakeup time while you are talking to the guest, begin at Step 4.
2. If a wakeup is set or changed by the attendant console, and the system option to
print these changes has been enabled, a SET BY CON or CHG BY CON mes-
sage is sent to the terminal (SMDR) or printer to indicate who made the change
and when it was made.
3. A valid wakeup time has the format HH:MM where HH is between 00 and 23 for
24-hour clocks and 00 and 11 for 12-hour clocks, and MM is 00 to 59.
Chart 6-6 Cancelling Automatic Wakeup
e
I. Press FUNCTION.
2. Press the GUEST ROOM softkey.
3. Enter the extension (room) number.
4. Press the CLFI WAKEUP softkey.
The CLR WAKEUP softkey appears.
602 5-4
Revision 0 909-096602-NA
Issue 1