Mitel SX-200 Practices page 148

Features Descriotion
9 1 - Always (Unconditionally)
l
2 -Busy
l
3 - No Answer
l
4 - Busy or No Answer
Two examples of call forwarding from an extension are:
Internal calls are to bs fotwarded to 1701
when not answeied
External calls are to be forwarded to 1702
when busy or not answered
Go off-hook and receive dial tone
Go off-hook and receive dial tone
Dial Call Forward Internal access code - 65
Dial Condition code for No Answer - 3
Dial destination extension number - 1701
Receive dial tone and hang up
Dial Call Forward External access code - 62
Dial Condition code
for
Busy/No Answer - 4
Dial destination extension number - 1702
Receive dial tone and hang up
Conditions The following conditions apply to the Call Forwarding feature:
.
.
.
Valid call forwarding destinations are: Dial 0 access code, night bell,
LDN' s, hunt groups (not data or modem pooling type), industry-stan-
dard telephones, SUERSETtelephones, consoles, ACD Paths,
personal Speedcall keys, system Abbreviated Dial numbers, or per-
sonal speedcalls.
An extension is considered BUSY for forwarding busy if the extension
is not idle, has Do Not Disturb activated, or has its prime line appear-
ance busy.
Forwarding is operational for when the called party is a logical line if
the line appears on only a single telephone in the system. The for-
warding setting of the SUfERSfltelephone where the line is
programmed is used to forward calls.
Forwarding can be set up to the Dial 0 access code. The destination is
translated from the access code to the routing point based upon the
current NIGHT/DAY service at the time of forwarding (giving NIGHT/
DAY based forwarding). Priority Dial 0 can be used as well, with the
feature being checked for on the forwarding extension,
Fonrvarding does not apply if the calling extension is the party to which
the call would be forwarded.
Forwarding does not apply if the forwardee is an industry-standard
telephone, SUPERSETtelephone, or console and has COS Option
234 (Never a Forwardee) in its COS.
An extension can set up forwarding to an LDN.
Forwarding cannot be programmed from an extension to itself.
Forwarding is ignored when callbacks are honored, except when Call
Forwarding - No Answer is programmed and enabled.