Mitel SX-200 Practices page 753

5
.
USING THE HOTEL/MOTEL
FEATURE PACKAGE
Hotel/Motel features can be accessed from the Attendant console, Front desk terminal,
SUPERSET
display telephones and Industry-standard telephones (including
SUPERSET3, SUPE/?SET3DN, SLJPERSET401 and SUPERSET47Otelephones).
In addition, there are several features that can be accessed directly from the SX-200
DIGITAL PABX only.
Accessing Hotel/Motel from the Attendant Console
5.1
The features that can be accessed from the attendant console are shown in
Table 5-l.
Table 5-l Hotel/Motel Features Accessed from the Attendant Console
Feature Chart
Attendant Message Waiting Setup
and Cancel
Chart 5-1, Setting Up Message Waiting - Attendant
Chart 5-2, Cancelling Message Waiting -Attendant
Audits Chart 5-3, Requesting Audits
Automatic Wakeup Chart 5-4, Setting Automatic Wakeup
Chart 5-5, Cancelling Automatic Wakeup
Call Blocking Chart 5-6, Setting Up/Removing Call Blocking
Call Restriction See Room Status Display
Check In Chart 5-13, Searching for available room
(I/AC/CLEAN).
Chart 5-l 1, Changing the Status of a Room
(to OCCUPIED).
Check In Chart 5-l 1, Changing the Status of a Room
(to VACANT/DIRTY/TO INSPECT).
Do Not Disturb Chart 5-7, Setting Up Do Not Disturb - Attendant
Chart 5-8, Cancelling Do Not Disturb
Message Register Chart 5-9, Displaying the Message Register
Chart 5-l 0, Clearing the Message Register
Reserve Room Chart 5-l 1, Changing the Status of a Room
(to RESERVED/GUARANTEED).
Room Status Display (Room Occu-
panty, Room Condition, Call Re-
Chart 5-11, Checking/Changing the Status of a Room
striction)
Searches 1 Chart 5-12, Searching for a Particular Room bv Number
Chart 5-13, Searching for Rooms by Status
9109-096-602-NA Issue 1 Revision 0
602 5-l