Data Capabilities - Mitel SX-200 Practices

LIT 96, and Generic 1005.
telephone that provides advanced telephony features. The SUPERSET 430 has12
keys that can be programmed as Speed Call keys or Line Appearances. An
alphanumeric bitmap graphics display and six softkeys allow users to select call
handling features easily. A
an interface for a data device. The SUPERSET 430 telephone is available only with
Generic 1005.
Attendant Console: The SX-200 DIGITAL PABX supports two types of Attendant
consoles; the LCD Console and the
LCD Console interfaces to a console module on the Universal card, while the
circuit on a Digital Line card. The latter also provides a printer port and a tilt display. The
Lamp Field and a 32-key direct station select keypad. It increases the number of
programmable feature keys on its associated
DSS Module is not available with Generic 1001 or 1002.

Data Capabilities

2.6 The MITEL datasets provide data facilities for terminals, digital
telephones, and other types of data circuits. The DATASET 1100 series support
asynchronous data communications at rates up to 19.2 kbps and interface with the
SX-200 DIGITAL PABX through a Digital Line Card. The DATASET 2100 series
support asynchronous and synchronous data communications at rates up to1 9.2
kbps and interface with the SX-200 DIGITAL PABX through a Digital Line Card. Data
capabilities are not available with Generic 1001.
MiLink Data Module: The
on the base of
is used to interface a terminal, personal computer, or other peripheral device to a host
computer. The
MiLink
the same pair of wires that the telephone set voice circuit uses. It is available only with
Generic 1005.
DN or a
an internal cable to the telephone set circuit and is used to interface a terminal, personal
computer, or other peripheral device to a host computer. It interfaces to the PABX Digital
Line Card through the same pair of wires that the telephone set voice circuit uses. The
datasets, mounted on a common printed circuit board. It is installed in a
DATASHELF 9100 within a DATACABINET 9000. Its primary function is to interface
Issue
Data Module can be connected to this set to provide
MiLink
1000 attendant console interfaces by one pair wiring to a DNIC
1000 attendant console is not available for Generic 1001~
Data Module is connected to a modular jack located
Data Module interfaces to the PABX Digital Line Card through
DN telephone set. The cartridge is connected via
1 Revision
System Overview
Module provides a 32-position Busy
telephone. A
or SUPERSET430telephones,
0
and
100 2-7