Mitel SX-200 Practices page 707

System Description
Room Type Search
(Front Desk Terminal only.) A search can be conducted on the basis of room type. The
class of service number for the room type is used as the room code for search
purposes. There is a wild card entry for searching all room types.
Searches can also be conducted on the basis of room status and room type. See Room
We.
How to /=rogrm
N/A
How to Use Console: N/A
FDT
Chart 5-35
Maid in Room Search
A search can be conducted from SLJPERSET4, SUPERSET420, SUPE/?SET4DN,
or SUPERSET 430 telephones, the attendant console or a front desk terminal on the
basis of Maid in Room Fable 2-22). Rooms with a maid in them are displayed in
sequence from lowest to highest room number. See Room Status Search.
Table 2-22 Maid in Room Search
pressing the MAID them are displayed. If there are more rooms being
cleaned, the MORE... softkey appears. This softkey
displays the other guest room extension numbers,
10 at a time. When the last room number is
key disappears. Only
the PAGE DOWN softkey appears. This softkey
displays the other guest room extension numbers,
nine at a time. When the last room number is
displayed, the PAGE DOWN softkey disappears,
and the PAGE UP softkey appears. The PAGE UP
softkey allows paging backwards, nine rooms at a
time. This softkey is not available on the first screen
of nine rooms. If no rooms are found that meet the
Page 1 of 2
9109-096-602-NA
Issue 1 Revision 0
602 2457