Mitel SX-200 Practices page 202

Features Description
105 2-130
Dial the number to which calls are to be forwarded.
Dial tone returns.
Hang up - the extension is available for normal use.
To cancel Call Forwarding - Don' t Answer:
l
Lift the handset - wait for dial tone.
9 Dial any forwarding access code.
l
Hang up - the forwarding is canceled.
or
9 Lift the handset - wait for dial tone.
l
Dial the Clear All Features access code (see Clear A// features). This
also cancels all forwarding at the telephone.
SUPERSET
Telephones:
To select Call Forwarding - Don' t Answer:
l
Follow the same procedure as for industry-standard telephones; it is
also possible to go off-hook using the SPEAKER ON/OFF key.
SUPERSET
DN Telephones:
To set up Call Forwarding - Don' t Answer:
l
Follow the same procedure as for industry-standard telephones; it is
also possible to go off-hook using the SPEAKER ON/OFF key,
To activate or deactivate Call Forwarding - Don' t Answer already
programmed:
l
Press the CALL FORWARD feature access key, if programmed. The
LCD indicator is dark (activated) to indicate forwarding active, clear to
indicate not active.
SUPERSET
Telephones:
To display the current Forwarding type and destination:
l
Press the DISPLAY key.
l
Press the CALL FWD softkey - read the display.
l
Press the EXIT softkey.
To activate Forwarding already programmed:
Press the SELECT FEATURES key.
Dial 1 (feature number 1 is Forwarding (1 :FWD)) -the current type
and destination are displayed.
Press the ON softkey to activate forwarding; if activation is not de-
sired,press the EXIT softkey.
Revision 0 9109-096-l 05-NA Issue 1