Mitel SX-200 Practices page 725

Programming Hotel/Motel
Chati 4-l Programming the Hotel/Motel Application
(continued)
Step Action Comments.
244 Room Status Applies Room Telephones. This COS option must
be enabled to allow guests to set up a
wakeup alarm call from their extension. See
also COS option 202.
It must be enabled to al,low the attendant to
display and change the status of a room and
produce a room status audit. See Form 04,
System Option 33.
It must be enabled for SUPEWET4DN and
SUPERSET room telephones that are
to be programmed with speed dial and
feature access keys. See COS option 610
and Form 37.
320 Transparent Multiconsole
Operation
Attendant Consoles.
Enables more than
one console to function on the system,
Can also allow multi-consoles to view and
remove messages for guest room phones,
COS option 320 is necessary for consoles
only. It is not necessary for front desk
terminals.
Not available with Generic 1001,
608 SUPERSET Room Status Display
SWERSETSupervlsory Telephones.
This
COS option allows room status to be
displayed on a SUPERSETsupervisory
telephone.
610 SUPERSET 3DN/4DN Guest Room
SUPERSET
Room Telephones.
This COS
Template option allows a block of guest room
SUPERSETDN telephones to be
programmed with speed dial and feature
access keys.
Also applies to SUPERSET410,
SUPERSET 420 and SUPERSET430,
See also COS option 244.
See also Form 37: Guest Room SUPERSET
Keys Template.
Not available with Generic 1001 or 1002.
Page 4 of 9
9109-096-602-NA
Issue 1 Revision 0 602 4-5