Mitel SX-200 Practices page 671

System Description
SX-200 DIGITAL PABX Access
The SX-ZOO DIGITAL PABX provides direct access to some Hotel/Motel features.
These are system-level features that require no user interaction.
SX-ZUO
DIGITAL PABX
v
v
V
PMS Interface*
Message Lamp
Test *
Auto Room Status
Conversion/Auto
Wakeup Print
* Not available in Generic 1001.
Figure 2-15 Hotel/Motel Features Available Only from the SX-200 DIGITAL PABX
Access Mechanism.
These features are programmed through CDE.
Table 2-7 shows the Hotel/Motel features accessed directly through CDE
programming on the SX-200 DIGITAL PABX and not through any terminal.
Table 2-7 SX-2UU DIGITAL PABX Access Functions
PMS
Automatic
Auto
Room Status
Conversion/Auto
Wakeup Print
Automatic
Message
Lamp
Test Automatic
9109-096-602-NA
Issue 1
Function
Creates a singNine printout for certain events, such as
an automatic wakeup call going unanswered.
Interfaces the SX-200 DIGITAL PABX to a PMS pack-
age.
Prints a report of all rooms with a wakeup time set, and
changes the room condition of occupied rooms from
clean to dirty at a particular time each day.
Performs a test of message waiting lamps whenever the
room status changes from occupied to vacant and there
are no messages waiting.
Revision 0
602 2-21