Mitel SX-200 Practices page 168

Features Descriotion
Press the Yes softkey.
Press the No softkey until I' M HERE? appears in the display.
Press the Yes softkey.
Enter extension number from which calls are to be forwarded. If an in-
valid number is entered, the display shows INVALID. Use the
* softkey to back space and erase the entry,
Press the
Save
softkey. The extension number and name from which
your calls will be forwarded to, appear momentarily in the display. The
display then returns to showing the date and time. Call Forwarding is
now programmed and enabled.
To cancel Call Forwarding I' m Here:
Press the
Speaker
key.
Dial the Cancel I' m Here access code.
Dial the extension whose forwarding is to be canceled and press the
Speaker
key. The forwarding is canceled for that extension.
or
Press the
Speaker
key to cancel all I' m Here forwarding to this exten-
sion.
SUPERSET 4
DN and SUPERsET Telephones:
To set up and activate Call Forwarding - I' m Here, using softkeys:
.
.
.
.
.
_
.
At the destination
SUPERSET 4
DN telephone, find and press the
For-
warding
softkey.
Press
Change
softkey (necessary only if Split Forwarding is disabled).
Press
To Me
softkey.
Enter extension number from which calls are to be forwarded.
Press
Save/On
softkey.
NOW FROM xXxXx ALWAYS is displayed.
To cancel Call Forwarding I' m Here:
.
105 2-96
Press the
Speaker On/Off
key.
Dial the Cancel I' m Here access code.
Dial the extension whose forwarding is to be canceled and press the
Speaker On/Off
key. The forwarding is canceled for that extension.
or
Press the
Speaker On/Off
key to cancel all I' m Here forwarding to this
extension.
Revision
0 9109-096-105NA
Issue
1