Mitel SX-200 Practices page 196

Features Description
Press the
Forwarding
softkey. The display shows the current forward-
ing type and destination, if programmed.
Press
SuperKey
to return to normal display.
To activate Forwarding already programmed:
l
Press the
Turn FWD On
softkey. cFWD ON> appears in the upper
right corner of the LCD.
To deactivate Forwarding:
l
Press the
Turn FWD Off
softkey. <FWD ON> disappears from ttie dis-
play.
To Set Up Forwarding:
Press
SuperKey.
Find the
Forwarding
softkey. (Use the
More
softkey).
Press the
Forwarding
softkey. The display shows the current forward-
ing type and destination, if programmed.
Press the
Change
softkey. Softkeys appear for the types of forwarding
enabled in the set' s COS.
Select Call Forwarding - Busy/Don' t Answer. The display requests the
destination number.
Enter the destination number. If an invalid number is entered, the dis-
play shows INVALID NUMBER. Use the + softkey to back space
and erase the entry. Enter the correct number (can be a speedcall key,
if programmed) or press the
Current No.
softkey to restore the pre-
viously programmed destination, (if available).
Press the
Save/On
softkey. The display returns to normal. 43/D ON>
appears in the top right corner.
-Call Forwarding - Follow Me
GenerIc1001,1002and1003
Description
This type of forwarding is unconditional. All calls are forwarded to the pro-
grammed destination. The number to which the calls are forwarded is the
only party that will ring the forwarding extension while Forwarding - Fol-
low Me is active. The extension may originate calls in the normal manner.
Conditions See
conditions for Call Forwarding - Generic 1001, Generic 1002, and
Generic 1003.
Programming
Enable COS Option 209 (Call Forwarding - Follow Me) in the extension' s
cos.
105 2-124
Revision
0 9109-096-1054A
Issue
1