672-Part Peripheral Cabinet; Fd Peripheral Cabinet - Mitel SX-200 Practices

General Descriotion
672-Port Control Cabinet
3.4 The SX-200 DIGITAL 672-Port Control cabinet, shown in Figure 3-4, contains the
Control shelf, Bay 0 in the lower left position, Bay 1 on the lower right, and Bays 2 and
3 in the upper shelf. The Control cabinet supports up to three 6-circuit power fail
transfer cards. The 672-port configuration is not available with Generics 1001 and
1002.
Bay 0 contains:
1 Main Control Card, 1 Bay Power Supply, 1 Switch Matrix Card, and
2 Floppy Disk Drives.
Bays 1 to 3 each contain:
1 Bay Power Supply, 1 Bay Control Card, and up to 8'Digital
Peripheral cards.
672-Port Peripheral Cabinet
3.5 The SX-200 DIGITAL PABX 672-port optional Peripheral cabinet (shown in
Figure 3-5) consists of 4 digital bays with 96 ports each. Each bay is connected to
and controlled by Bay 0 in the Control cabinet. The 672-Port Peripheral cabinet also
supports three 6-circuit power fail transfer cards, for a system total of 36 PFT
circuits.
Bays 4 to 7 each contain:
1 Bay Power Supply, 1 Bay Control Card, and up to 8 Digital
Peripheral cards
Note: An SX-200 DIGITAL 672-part PABX may also be created by converting an installed
336-part Control cabinet to a Peripheral cabinet and adding a new 672-part Control
cabinet.
100 3-6
Revision 0 9109-096-l OO-NA
Issue 1