Mitel SX-200 Practices page 162

Features Description
To cancel Forwarding (all types):
Lift the handset-wait for dial tone.
Dial the Call Forwarding All Calls access code.
Hang up - the forwarding is canceled.
or
Lift the handset - wait for dial tone.
Dial the Clear All Features access code (see Clear
All
Features). This
also cancels all forwarding at the telephone.
;
SUPERSET
Telephones:
To select Call Forwarding - Follow Me:
. Follow the same procedure as for industry-standard telephones; it is
also possible to dial the codes and extension destination directly on
the keypad and then press the
Speaker On/Off
key to go on-hook.
SUPERSET 3
DN and
SUPERSET
Telephones:
To set up Call Forwarding - Follow Me:
l
Follow the same procedure as for industry-standard telephones; it is
also possible to dial the codes and extension destination directly on
the keypad and then press the
Speaker On/Off
key to go on-hook
To activate or deactivate Forwarding already programmed:
l
Press the CALL FORWARD feature key, if programmed. The LCD indi-
cator is dark (activated) to indicate forwarding active, clear to indicate
not active.
SUPERSET 4
Telephones:
105 2-90
.
Press the SELECT FEATURES key.
.
Dial 1 (feature number 1 is Forwarding (1 :FWD)) - the current type
and destination are displayed.
.
Press the ON softkey to activate forwarding; if activation is not de-
sired,press the EXIT softkey.
To display the current Forwarding type and destination:
l
Press the DISPLAY key.
l
Press the CALL FWD softkey - read the display.
l
Press the EXIT softkey.
To activate Forwarding already programmed:
Note:
A Feature Key may be used here instead.
Revision 0 9109-096-l 054A
Issue
1