Mitel SX-200 Practices page 656

Hotel/Motel Feature Package Description
Access Mechanism.
Access to the Hotel/Motel package is through the FUNCTION
hardkey and the GUEST ROOM softkey on the attendant console. The Hotel/Motel
features are then available on softkeys. One feature, Call Block (blocking calls between
rooms, see page 602 2-36) is accessed through the BLOCK hardkey.
Attendant Console
1
Call Blocking
All other Hotel/Motel Features
Figure 2-2 Access Mechanism for Hotel/Motel Features on the Attendant Console
The Hotel/Motel features can be accessed whether the attendant console is idle or in
the process of handling a call. When handling a call from a guest room, after the
FUNCTION hardkey and GUEST ROOM softkey are pressed, the attendant console
display shows information about the source on the top line of the display, room
information on the second line, and the softkeys on the remaining two lines. Note that
information about the source is presented without pressing the FUNCTION and
GUEST ROOM keys in Generic 1002, Generic 1003, Generic 1004 and Generic 1005.
See Figure 2-3.
4951 COSl2COROlDNDMSW
Reg = 00001 Wakeup = 12:34P Status = Vac/CleaaD
IFI~ mu U~~CLRREG
mF3b SETWAKE-UPiF4b CLRWm-UP ~F5~KlXl'US
1~6b ~F~~~ENDMsG ~FSB BF9bREADMSG
mF* ROOMNUMBER
Figure 2-3 Guest Room Display During a Call from the Guest Room
'Pressing the GUEST ROOM softkey while the attendant console is not engaged in a
call produces the display shown in Figure 2-4.
Enter Room Number:-
11:12AM 6C/%
B~lbmT NF2bMAID
mF3b VACKLEAN mF4b AUDITS 1F5b
D~6b
~F~~RESKLEANR~~FS~ mF9b OUTOFSERV. iF*
Figure 2-4 Guest Room Display with Idle Console
602 2-6 Revision 0 9109-096-602-NA
Issue 1