Mitel SX-200 Practices page 203

.
Features
Forwarding is now active; the word FWD is displayed in the top left corner of
the LCD as a reminder.
To deactivate Forwarding:
.
.
.
Press the SELECT FEATURES key
Dial 1 (feature number 1 is Forwarding (1 :FWD)) -the current type
and destination are displayed.
Press the OFF softkey to deactivate forwarding; if deactivation is not
desired, press the EXIT softkey.
;
To Set Up or Modify Call Forwarding - Don' t Answer:
l
With the handset on-hook, press the PROGRAM feature key.
l
Press the CALL FWD feature key.
The alphanumeric display shows a Forwarding type. If the displayed type is
not the one required, press the NO softkey; another type is displayed.
Repeat until the desired type is displayed. When the displayed type appears,
press the YES softkey.
l
Dial the forwarding destination, or press a Speedcall key.
l
Check the number on the display.
- To correct an error, use the 4 key.
l
Press the SAVE softkey when the correct destination is displayed.
SUPERSET DN
Telephones:
To display the current forwarding type and destination:
l
Press
SuperKey.
l
Find the
Forwarding
softkey. (Use the
More
softkey).
0 Press the
Forwarding
softkey. The display shows the current forward-
ing type and destination, if programmed.
l
Press
SuperKey
to return to normal display.
To activate Forwarding already programmed:
. Press the
Turn FWD On
softkey. &WD ON> appears in the upper
right corner of the LCD.
To deactivate Forwarding:
l
Press the
Turn FWD Off
softkey. cFWD ON> disappears from the dis-
play.
To Set Up Forwarding:
l
Press
SuperKey.
l
Find the
Forwarding
softkey. (Use the
More
softkey).
9109-096-105-NA
Issue
1
Revision 0
105 2-131