Mitel SX-200 Practices page 141

Features
SUPERSET 401
Telephones:
A normal 2-party call is established, and the extension user requires to
consult a third party:
Press the
Flash
key - dial tone is heard, and the second party is
placed in consultation hold.
Dial the number of the third party and establish a private 2-party con-
versation.
To alternate between calls, press the
Flash
key.
I
Broker' s Call With Transfer (Transfer With Privacy)
Description
The Broker' s Call With Transfer (Transfer With Privacy) is similar to the
Broker' s Call feature but users are also able to transfer calls. A flash is
interpreted as a Swap instead of an attempt to conference (see Broker' s
Call). A conference cannot be formed by an extension that has Broker' s
Call With Transfer enabled. However, unlike Broker' s Call, when the ex-
tension goes on-hook to transfer an extension, the transfer is not
prevented. As well, some consultation COS option checks are not done
with the Broker' s Call feature but they are done for Broker' s Call With
Transfer. Also see Broker' s Call
(Trade Calls)
for general information
about Broker' s Calls.
This feature applies to
SUPERSET
401 telephones and industry standard
telephones.
Conditions
The following conditions apply to this feature:
.
_
COS Option 252 (Broker' s Call With Transfer) (previously Transfer
With Privacy) is mutually exclusive with the following options:
- 302 (Flash-in Conference)
- 224 (Flash for Attendant)
- 223 (Flash Disable)
- 203 (Broker' s Call).
An extension with COS Option 233 (Never a Consultee) may not be
consulted.
COS Options 214 (Cannot Dial a Trunk After Flashing) and 215 (Can-
not Dial a Trunk After Flashing If Holding or in Conference With One),
do not apply to an extension with COS Option 252 (Broker' s Call With
Transfer) (previously Transfer With Privacy) enabled.
9109-096105-NA
Issue
1
Revision
0
105 2-69