Mitel SX-200 Practices page 182

Features Description
SUPERSET Telephones:
To display the current Forwarding type and destination:
9
Press the DISPLAY key.
9
Press the CALL FWD softkey - External forwarding is displayed; press
the NEXT softkey, the ON softkey, or the OFF softkey to go to Internal
Forwarding - read the display.
.,
l
Press the EXIT softkey.
To activate Forwarding already programmed:
Press the SELECT FEATURES key.
Dial 1 (feature number 1 is Forwarding (l:FWD)) -the current External
type and destination are displayed; press NEXT softkey to move to
Internal forwarding.
Press the ON softkey to activate external forwarding, and move to the
internal forwarding display; if activation is not desired, press the EXIT
softkey.
To deactivate Forwarding:
Press the SELECT FEATURES key.
Dial 1 (feature number 1 is Forwarding (1 :FWD)) -the current External
type and destination are displayed; press NEXT softkey to move to
Internal forwarding.
Press the OFF softkey to deactivate forwarding; if deactivation is not
desired, press the EXIT softkey.
To Set Up or Modify Forwarding:
l
With the handset on-hook, press the PROGRAM feature key.
l
Press the CALL FWD feature key.
The alphanumeric display shows EXT CALLS?; press NO to toggle to INT
CALLS? and again to toggle back. When the displayed type appears, press
the YES softkey. Similarly, toggle the NO softkey to select the desired
condition.
If the call is to be forwarded within the PABX, dial the forwarding destination.
If the call is to be forwarded to an outside number, press the SPEED CALL
key associated with that number or dial the Abbreviated Dial number, if
available.
105 2-110
Check that the destination number indicated on the display is correct,
- To correct an error, use the 4 key.
Press the SAVE softkey.
Revision
0 91094X%-105-NA
Issue
1