Mitel SX-200 Practices page 721

4
' PROGRAMMING HOTEL/MOTEL
General
4.1 This section discusses the programming required for the Hotel/Motel feature
package on the SX-200 DIGITAL PABX,
It gives only the programming required for the Hotel/Motel feature package. For
information on programming the base SX-200 DIGITAL system, printers, consoles,
front desk terminals, and datasets, refer to the appropriate issue of Practice
9109-096210-NA, Customer Data Entry.
Programming Procedures
Hotel/Motel Application.
For information on programming this feature package, see
Chart 4-l.
Property Management System.
For information on programming the interface to a
property management system, see Chart 4-2,
Adding Features.
For information on adding features to an already programmed
system, see Chart 4-8 to Chart 4-21.
Chart 4-3 :Programming Attendant Message Waiting Setup and Cancel
Chart 44 :Programming Attendant Message Register Audit
Chart 4-5 : Setting up Room Status Audit
Chart 4-6 : Programming Wakeup Audit
Chart 4-7: Producing an Automatic Audit of Wakeups/
Changing Room Status at a Predetermined Ttme
Chart 4-8 : Setting System Time
Chart 4-9:Programming Guest Room Automatic Wakeup
Chart 4-l 0 : Programming Attendant Automatic Wakeup
Chart 4-11 : Programming Call Blocking
Chart 4-12 : Programming Call Restriction
Chart 4-13 : Programming Do Not Disturb
Chart 4-l 4: Guest Room SUPEI?SETKey Programming
Chart 4-l 5:Programming Maid in Room Status
Chart 4-16: ProgrammingMaid in Room Status Display - SUPE/?SE7 4,
SUPERSET 420, SUPERSET 4DN and SUPERSET 430 Telephones
Chart 4-l 7: Programming Message Lamp Test
Chart 4-l 8: Programming Message Register
Chart 4-19: Setting up Room Status
Chart 4-20: Programming Room Types and Room Codes
Chart 4-21: Enabling Single Line Reports
Chart 4-22: Programming Room Status Display - SUPERSET
4,
SUPERSET 420, SUPERSET 4DN and SUPERSET 430 Telephones
9109-09&602-NA
issue
1
Revision
0 602 4-l