Call Forwarding-Busy - Mitel SX-200 Practices

Features
l
Dial one of four Condition codes under which a call is forwarded (does
not apply for Call Forward - I' m Here and Cancel I' m Here):
1 - always, 2 - busy, 3 - no answer, 4 - busy/no answer.
Enable System Option 21 (Incoming to Outgoing Call Forward) to allow
trunks to be call forwarded externally.
Enable one or more of the following COS Options as required:
l
206 Call Forwarding - Busy
l
207 Call Forwarding - Don' t Answer
l
208 Call Forwarding - External
l
209 Call Forwarding - Follow Me
l
210 Call Forwarding - Inhibit on Dialin Trunks
l
222 Call Forwarding - Inhibit on Hold Timeout
l
253 Call Forwarding - Don' t Answer Timer (251 in Generic 1001)
l
258 Display Prime As Forwarder (Generic 1003, 1004, and 1005 only)
l
260 Internal / External Split Call Forward
Operation Operation varies depending upon the device type as described in the fol-
lowing sections.
Call Forwarding - Busy Generic 1004 and 1005
Description
This feature forwards all calls when the extension is busy. While the ex-
tension is idle, calls may be made and received normally.
Conditions
The following conditions apply to this feature:
l
Refer to conditions listed under the heading, Call Forwardjng -
Generic 1004 and Generic 1005.
Programming
Enable COS Option 206 (Call Forwarding - Busy) in the extension' s
cos.
Ensure Feature Access Code 03 (Call Forwarding -All Calls) has a feature
access code programmed.
For feature key activation of call forwarding on a SUPERSET 3 DN,
SUPERSET 410, or SUPERSET 420 telephone, program a CALL
FORWARD feature key. (See Feature Keys.)
Operation
Operation varies depending upon the device type as described below.
9109-096-l 05-NA Issue
1
Revision 0
105 2-79