Mitel SX-200 Practices page 256

Features Description
Enable or disable COS Option 903 (DTRX Message Code Text) as desired.
Enabling this option allows display of the message text (e.g. Connected); the
message category is not displayed. The text also displays a user action if
appropriate (e.g. System Busy, Please Wait). If the Message Code option is
also enabled, the complete message is displayed.
Enable or disable COS 904 (DTRX Complete Message Text) as desired.
This option displays the message code, the message category, and the text
(e.g.DO207 Call Failure - Destination Not Ready).
Operation See Data: DTRX Call Originate/Disconnect.
Data: DTRX
Call by Name
Description
Conditions
Programming
Operation
105 2-184
The Data Transceiver (DTRX) Call by Name feature allows the user to
call a data hunt group or modem pool hunt group by name instead of
number. This feature is not available in Generic 1001.
The hunt group must have a name programmed.
Modem pools are not available in Generic 1001 or 1002.
Assign names to data and modem pool hunt groups in CDE Form 17
(Hunt Groups).
At the DTE, in response to the * prompt:
1.
2.
1.
2.
3.
enter CALL or C.
enter the name. (Example: C SYS)
or,
enter CALL
enter the modem pool hunt group name,
enter the destination number. (Example: C MODEMS 5551234)
Revision
0
9109-096-l
05-NA
Issue
1