_ Call Announce - Mitel SX-200 Practices

Features Description
General Mode:
In this mode of operation, the calculator allows for arithmetic
operations. The telephone keypad is used as the numeric keypad; the * key
is used as the decimal point key. Arithmetic operators (x, t, -, +/=), clear
entry/clear (CE/CLR) and another decimal point key appear on the softkeys.
The display is on the top line of the LCD display.
Programmer Mode:
In this mode of operation, the calculator allows for
integer arithmetic / logical operations in either decimal or hexadecimal. In
this mode, each softkey has 2 functions -the active function is designated by
"
the b pointer. To change to the second function, press the 2ND FUNCTION
softkey. The display is on the top line of the LCD display. The second line of
the display is the status register (nzvc - negative, zero, overflow, carry).
When a bit in the status register is set, the corresponding letter is capitalized.
The RADIX softkey switches between hexadecimal and decimal. The CLR
softkey clears the displayed value (if there is no pending operator. Pressing
the CLR softkey twice will always clear the status register. All operations are
32-bit. To enter hexadecimal characters A through F, enter the following:
A=+l, B=*2, C=*3, D=*4, E=*5 and F=*6.
Conditions
This feature is available only on SUPERSET 4 DN and SUPERSET 430
telephones.
Programming
None
Operation
The calculator feature operates as follows:
l
Press
SuperKey.
.
Press
Calculator
softkey.
l
Press
SuperKey
when completed.
_ Call Announce
Description
This feature allows a caller to announce a call through a SUPERSET
telephone' s speaker (Call Announce Port) prior to transferring it. When
the held party is released to the SUPERSETtelephone the transfer is
made to the SUPERSETtelephone itself - if the set is idle, it rings; if it is
busy, the call camps on. Also see Cd/Announce Port
Conditions
The following conditions apply to this feature:
l
Call Announce operates only on SUPERSET 4 telephones.
l
The SUPERSET telephone can be on a call at the time.
105 2-72 Revision
0
9109-096-l 05-NA
Issue 1