Mitel SX-200 Practices page 251

Features
Conditions
Programming
Operation
same operating characteristics as the DATASET 1100 series. In
synchronous mode, the DATASET 2100 series uses X.31 protocol.
The DATASET 2100 series is available in two package options:
l
DATASET 2102 Rack-Mounted Card
* DATASET 2103 Standalone.
All datasets interface to a PABX digital line card circuit through a single pair.
These devices are not available in Generic 1001,
Refer to Practice 9109-096-I 26-NA, Peripherals Devices, for information
on the cabinet and shelf that is available for rack mounted data devices,
A Modem Interconnect Panel is available for installation within the
DATACABINET 9000 cabinet; refer to Practice 9109-096-l 26-NA,
Peripherals Devices. The Modem Interconnect Panel is required for Modem
Pooling.
For information on using data devices as printer ports, see Directed
Input/Output.
For details on the the SUPERCONSOLE 1000" printer port, see Directed
Input/Output.
For details on data circuit descriptor options, refer to Practice
9109-096-210-NA, Customer Data Entry.
Refer to Practice 9109-096-125-NA, Circuit Card Descriptions, for a
description of the Digital Line Card.
Refer to Practice 9109-096-I 26-NA, Peripherals Devices,
Program a Digital Line Card card into the system' s physical configuration
table via CDE Form 01 (System Configuration).
Select options for the data circuit descriptors via CDE Form 11 (Data Circuit
Descriptors).
Assign a circuit descriptor and select options for specific data circuits via
CDE Form 12 (Data Assignment).
None.
9109-096-l 05-NA tssue 1
Revision 0 105 2-179