Voicecapabilities - Mitel SX-200 Practices

General Description
Capabilities
Voice
2.5 The SX-200 DIGITAL PABX interfaces to analog and digital peripheral devices using
standard twisted-pair office wiring. Peripheral devices include, but are not limited to,
the following:
Standard Telephones: Industry-standard rotary dial and DTMF telephones are
supported; ONS lines provide an interface for these sets.
capabilities and a number of features designed to simplify call handling.
telephone, supplying visual features such as line status indication, time and date
display, caller identification and word prompts to facilitate call handling.
controlled electronic telephone set, containing digital electronic circuitry. It provides
advanced call handling features such as programmable feature keys, digital
communication with the host PABX and message waiting LED. A DATASET 1101
Cartridge can be integrated into this set. A SUPERSET DN telephone is not available
with Generic 1001.
controlled electronic telephone set, containing digital electronic circuitry and liquid
crystal displays (LCD). The
telephone set, employing all the features of a SUPERSET#telephone with the addition
of a calculator and programmable feature keys. A DATASET 1101 Cartridge can be
integrated into this set. A
1001.
telephone. It has a Trans/Conf key, a Message key, and a message indicator lamp,
as well as keys for adjusting the ringer and handset receiver volume. The
LIT 96 and Generic 1005.
telephone. In addition to its1 0 fixed function keys, the
can be programmed as Speed Call keys, Feature Access keys or Line Appearances.
A /Wink Data Module can be connected to this set to provide an interface for a data
device. The
Generic 1005 LIT 96, and Generic 1005.
has 12 programmable keys with associated LCD indicators. These keys can be
programmed as Speed Call keys, Feature Access keys or Line Appearances. Directly
below the 12 programmable keys is a 2x16 alphanumeric bitmap graphics display and
three softkeys. The three softkeys allow set users to select command prompts that
appear in the display. The set also has a Message key and Microphone key with
indicator lamps, and eight fixed function keys without indicator lamps. A
Module can be connected to this set to provide an interface for a data device. The
100 2-6
Telephone: The
telephone is available only with Generic 1005 FPKG 1, Generic 1005
Revision 0
4 DN telephone is a more sophisticated
DN telephone is not available with Generic
telephone is a single-line digital
is a multi-line digital telephone. It
9109496-I
has 6 keys that
Data
OO-NA Issue1