Mitel SX-200 Practices page 589

SMDR Programming and Control
Table 6-l CDE-Selected SMDR COS
and System Options
Note: SMDR - Record ANI/DNIS is only available with Generic 1005. Five-digit SMDR is not available with Generics
1002 and 1003. ACD Reports are not available with Generic 1002,1003 Basic and 1005 FPKG 1 and LIT96.
Data SMDR Programming Options
6.3 Three Class of Service (COS) options and one System Option, as listed in Table 6-2,
are available with Data SMDR (Data SMDR is not available with Generic 1001 and
Generic 1005 FPKG 1 and LIT96):
*
Data SMDR
-
Does Not
Apply:
This option, when enabled, prevents Data SMDR
records from being printed.
l
Data SMDR - Extended Record: This option, when enabled, adds the system
identifier to the Data SMDR record.
l
Data SMDR -Overwrite Buffer: This option, when enabled, will prevent a data call
from being blocked due to a lack of Data SMDR buffers. However, with buffers being
overwritten, there is no guarantee of recording all data calls. If disabled, data calls
will be blocked if there are no available Data SMDR buffers.
l
Data SMDR - Indicate Long Calls: This timer, when enabled, provides an identify-
ing character in column 1 to indicate the approximate length of the call.
9109-096-221 -NA
Issue 1
Revision 0 221 6-3