Attendantbellcff - Mitel SX-200 Practices

Features
Operation
When an incoming call is not answered within the programmed time, a
recording is connected to the caller to advise the caller that there are
many incoming calls and the call will be answered shortly. The actual
message given is a pre-recorded message, recorded by the customer on
a customer-provided Recorded Announcement Device. The position of
an incoming call being held in the calls waiting to be answered queue, is
maintained while receiving the recorded message. The recorded mes-
sage will be terminated as soon as an Attendant becomes available. If the
incoming call is still waiting to be answered after the complete message
has been delivered, the incoming call is connected to system Music on
Hold.
r
Attendant Bell Off
Description
This feature allows the Attendant to mute the console ringer. Incoming
calls are indicated by a flashing Answer Key LED and LDN softkeys dis-
played on the console. When the console ringer is disabled, "BELL
0FF"appears on the second line of the console LCD display.
Conditions
The following conditions apply to this feature:
l
The system default state for this feature at power-up is "BELL ON".
l
The status of the bell is ignored by Lockout Alarms ringing at the con-
sole.
l
There is no bell on the console if Attendant Tone Signalling has been
enabled on the console.
Programming
Enable COS Option 100 (Attendant Bell Off) for the console.
Operation
To disable the console ringer, press the following keys:
l
FUNCTION key.
0 BELL OFF softkey.
To enable the console ringer, press the following keys:
l
FUNCTION key.
l
BELL ON softkey.
9109-096-l 05-NA
Issue 1
Revision 0
105 2-19