Ars - Mitel SX-200 Practices

Features
In the circuit descriptor options subform of Form 13, program the following
options for the ANVDNIS trunk:
l
Set the "Incoming Start Type" option to "Wink".
l
Set the "Wink Timer" to the required standard
(1 O&350 ms for MCI; 140-290 ms for US Sprint).
l
Set the "Debounce Timer" to 100 ms or greater.
Define theANI/DNIS trunk as a (non-dial-in) trunk in Form 14, or as aTlE or
DID trunk (non-DISA) in Form 15.
To program the PABX to display ANI and DNIS digits on a SUPERSET
display set or console, enable COS Option 502 (Display ANI/DNIS
Information) in the Class of Service for the set/console.
When COS Option 502 (Display ANVDNIS Information) is enabled,
SUPERSET display telephones show the DNIS digits during the ringing
state, and ANI digits during the answered state. To program a SUPERSET
display telephone to show the ANI digits during both the unanswered and
answered states, enable COS Option 613 (Display ANI Information Only) in
the Class of Service for the set. By default, COS Option 613 (Display ANI
Information Only) is disabled.
If you want ANI and DNIS digits recorded in the SMDR records, enable COS
Option 806 (SMDR-Record Incoming Calls) and COS Option 814
(SMDR-Record ANI/DNIS) in the Class of Service for the trunk.
Operation
None.
Automatic Route Selection (ARS)
Description
The SX-200 DIGITAL PABX Automatic Route Selection (ARS) feature
package combines the concepts of standard ARS (selecting optimum call
routes, inserting/deleting routing digits) and Toll Control (allowing/disal-
lowing specific extensions the ability to make specific types of
external/long distance calls).
Also provided are:
l
a universal numbering plan capability,
. six time-ofday zones,
l
three day zones for week days, and
0 overlap outpulsing.
9109-096-l 05-NA Issue 1 Revision 0
105 2-65