Mitel SX-200 Practices page 197

Features
Ensure Feature Access Code 06 (Call Forwarding - Follow Me) has a
feature access code programmed.
Operation Operation varies depending upon the device type and the Call Forward-
ing type.
Industry-standard Telephones:
To
.
.
.
.
.
set up Call Forwarding - Follow Me:
Lift the handset -wait for dial tone.
;
Dial the access code for Call Forwarding - Follow Me.
Dial the number to which calls are to be forwarded.
Dial tone returns.
Hang up -the extension is available for normal use.
To cancel Forwarding (all types):
Lift the handset-wait for dial tone.
Dial any forwarding access code.
Hang up -the forwarding is canceled.
or
Lift the handset - wait for dial tone.
Dial the Clear All Features access code (see Clear
All
Features). This
also cancels all forwarding at the telephone.
SUPERSET3 Telephones:
To select Call Forwarding - Follow Me:
l
Follow the same procedure as for industry-standard telephones; it is
also possible to go off-hook using the SPEAKER ON/OFF key.
SUPERSET
DN Telephones:
To set up Call Forwarding - Follow Me:
l
Follow the same procedure as for industry-standard telephones; it is
also possible to go off-hook using the SPEAKER ON/OFF key.
To activate or deactivate Forwarding already programmed:
l
Press the CALL FORWARD feature access key, if programmed. The
LCD indicator is dark (activated) to indicate forwarding active, clear to
indicate not active.
SUPERSET
Telephones:
To display the current Forwarding type and destination:
9109-096-l 05-NA
Issue 1
Revision
0 105 2-125