Call Forwarding - Follow Me - Mitel SX-200 Practices

Features
.
play shows INVALID NUMBER. Use the rt softkey to back space
and erase the entry. Enter the correct number (can be a speedcall key,
if programmed) or press the Current No. softkey to restore the pre-
viously programmed destination, if available (only available when the
current forward destination is anything but a speedcall).
Press the
Save/On
softkey. The display returns to normal. cFWD ON>
appears in the top right corner.
Call Forwarding - Follow Me Generic 1004 and 1005
Description
This type of forwarding is unconditional. All calls are forwarded to the pro-
grammed destination. The number to which the calls are forwarded is the
only party that may call the forwarding extension while Forwarding - Fol-
low Me is active. The extension may originate calls in the normal manner.
Conditions
The following conditions apply to this feature:
9 COS Option 260 (Split Forwarding) must be disabled.
l
Refer to conditions listed under the heading, Call Forwarding -
Generic 1004/Generic 1005.
Programming
Enable COS Option 209 (Call Forwarding - Follow Me) in the extension' s
cos.
Ensure Feature Access Code 03 (Call Forwarding -All Calls) has a feature
access code programmed.
For feature key activation of call forwarding on a SURE/GETS DN,
SUPERSET 410, or SUPERSET 420 telephone, program a CALL
FORWARD feature key. (See Feature Keys.)
Operation Operation varies depending upon the device type as described below.
Industry-standard and SUPERSET Telephones:
To set up Call Forwarding - Follow Me:
0 Lift the handset -wait for dial tone.
l
Dial the access code for Call Forwarding - All Calls.
. Dial the Condition code for the desired type of forwarding Alarms,
l
Dial the number to which calls are to be forwarded.
l
Dial tone returns.
l
Hang up -the extension is available for normal use.
9109-096-l 0544 Issue 1
Revision 0 105 2-69