Mitel SX-200 Practices page 113

.
Features
Attendant Implicit New Call
Description
When the Attendant presses a key on the console dial pad, by default a
new call is initiated. When the first key is pressed, an existing party is au-
tomatically placed on hold. At the completion of dialing, the Attendant can
transfer the call to the dialed destination by releasing from the call.
By pressing the TONES ON softkey (if available), this feature is temporarily
disabled. See Attendant Tone Signaling.
;
Conditions
None.
Programming
None.
Operation
Press any dial pad key.
- Immediately, the current call (if one exists) is placed on hold, and a new
call is initiated.
Attendant Individual Directory Number
Description
Each Attendant Console has a unique directory number identifying that
console.
The directory number is in addition to the general attendant access number
(usually 0) used to obtain the attendant or any LDN keys programmed at that
console. A calling party has the choice of either dialing the general attendant
access number, or dialing the directory number which is dedicated to a
particular attendant position (useful when there is more than one attendant
position).
Conditions
The following conditions apply to this feature:
0 Calls to an individual Directory Number are not presented to other at-
tendants (if any).
l
Calls directed to the Directory Number appear at a default softkey po-
sition provided by the system; see Attendant Default Call Positions.
Programming
Program the Directory Number of each attendant position in CDE Form
07 (Console Assignments).
Operation None.
9109-096-105-NA
Issue1
Revision 0
105 241