Mitel SX-200 Practices page 200

Features Description
Operation
Operation varies depending upon the device type and the Call Forward-
ing type.
For all telephones:
To select Forwarding - I' m Here:
l
At another extension, lift the handset - wait for dial tone.
l
Dial the Call Forwarding - I' m Here access code.
l
Dial your own extension number - dial tone returns.
;
l
Hang up -the extension is available for normal use.
To cancel Call Forwarding - I' m Here from the forwarded telephone:
Lift the handset - wait for dial tone.
Dial any forwarding access code.
Hang up -the forwarding is canceled.
or
Lift the handset - wait for dial tone.
Dial the Clear All Features access code (see Clear
A//
Features). This
also cancels all forwarding at the telephone.
Note:
The Attendant can also clear Call Forwarding at an extension.
SUPERSET
Telephones:
To
seiect Caii Forwarding - i' m Here, using softkeys:
.
.
.
.
_
.
.
At the destination SUPERSET 4 telephone, press PROGRAM softkey.
Press CALL FWD softkey.
Press NO softkey until I' M HERE option appears.
Press YES softkey.
The set responds with FR:
Enter extension number from which calls are to be forwarded. All calls
are forwarded from the specified extension.
SUPERSET 4
DN Telephones:
To select Call Forwarding - I' m Here, using softkeys:
l
At the destination SUPERSET DN telephone, press PROGRAM soft-
key.
9 Press CALL FWD softkey.
9 Press CHANGE softkey.
105 2-128
Revision 0 9109-098-l 05-NA
Issue I