Mitel SX-200 Practices page 615

3
.
PROGRAMMING AND CDE
This section describes how the Customer Data Entry (CDE) package is programmed
to set up the various functions already described in this document. The forms are more
fully explained in Practice 9109-096-210--NA, Customer Data Entry.
Tenant Assignments
3.1 Stations, sets, data sets, consoles, subattendants, enhanced subattendants, and
trunks are assigned to a tenant when they are programmed into the system during
CDE. The field labelled TEN is the tenant assignment field, Enter the tenant number
(l-25) to which the station or SWERSE7telephone belongs. For example, the
Station/SU/W?SE7 telephones programming form (Figure 3-l) shows that
extension 1101 and 1702 have both been assigned to Tenant I.
3:58 3Ei-NOV-89 alarm status = MAJOR
i&Y SLT CCT TEN EXTN COS COR TYP ANNOUNCE NhME asoc COMHENTS
1 81 Bl I
1231 I I Stn UILLANT Manager
1 01 02 1 1182 1 I Stn hLLING. Manager
1 Bl B3 1 lm3 1 1 Stn O'DELL Accounts
1 Bl FM I llB4 1 I Stn GDRBY &ccounts
1 Bl B5 1 lIEI 1 I Stn ALIYEUNG hccounts
1 @I E6 I
1166 1 I Stn SCOTT D. Secretary
1 Rl B9 Stn
1 El 1B Stn
1 El 11 I 1111 1 I Stn FERGUSON Pub Relatns
1 El1 12 Stn
1 E7 !a1
I 17a1 1 I &v CARDINAL SW supp.
1 07 02 I 17B2 1 I &v AEBC A Test
1 Bl g6 D 1106 1 I Stn SCOTF D. Secretary
.-MOVE 2-FIND EXl 3- 4- 5-RANGE
i-QUIT
7-BAY/SLT/CCT E-DELETE 9-REVIB' E-
Figure 3-l Stations / SUERSETTeiephone Programming Form
Interconnections Between Tenants
3.2
Each tenant may be allowed or not allowed to call any other tenant, as specified in
the Tenant Interconnection Table. On each horizontal line, an ( * ) indicates tenants
that may be connected, and a ( . ) indicates tenants that may not be connected from
one tenant to another. The tenant being examined (horizontal row) can connect with
each tenant that has an (* ) in its column.
9109-09&23O-NA
Issue 1 Revision
0 230 3-l