Access Codes -Global Find; Accountcodes - Mitel SX-200 Practices

Features
Access Codes - Global Find
Description
The Access Codes feature allows the user to view all access codes in the
system. The system reports the type of device associated with the access
code and its location (Bay/Slot/Circuit). The user can also query the sys-
tem about a particular access code. Data in Customer Data Entry Form
35 (Global Find Access Code), is generated by the system and cannot be
modified.
Conditions
Not available in Generic 1001.
Programming
None.
Operation
Refer to Practice 9109-096-210-NA, Customer Data Entry.
Account Codes
Description
Account codes are typically used to charge the cost of outgoing trunk
calls to departmental cost centers or project accounts. The account code
can be optional or mandatory, and appears on all Station Message Detail
Recording (SMDR) records. An account code can apply to both incoming
and outgoing trunk calls.
Account codes can range from 4 to1 2 digits.
For verified account codes, see Account Codes - Verified in this section.
Account codes can also apply to data calls. See Data Account Codes in the
Data Features section of this guide.
Conditions
The following conditions apply to this feature:
l
If Verified Account Codes are used, Account Codes can be four, six,
eight or 12 digits in length.
l
If the Account Code is of the Variable Length type, the account code
digits must be followed by a "#I", except where the entered code length
is 12 digits.
. Rotary-dial type telephones always have a digit length of six, as they
can not dial the # character.
9109-096-1054A
Issue
1
Revision
0
105 2-3