Mitel SX-200 Practices page 178

Features Description
l
Press the
Change
softkey.
l
Press the
TurnOn
softkey. An
to indicate that call forwarding
asterisk appears next to the destination
is activated.
. Press
SuperKey
to return to normal display.
To deactivate Forwarding to an external destination:
Press the CALL FORWARD Feature key. The indicator beside the key
turns off to indicate that Call Forwarding is deactivated.
or, if a CALL FORWARD Feature key isn' t programmed,
Press
SuperKey.
Press the No softkey until CALL FORWARDING? appears in the dis-
play.
Press the Yes softkey.
Press the
Change
softkey.
Press the
Turnoff
softkey. The asterisk next to the destination disap-
pears.
Press
SuperKey
to return to normal display.
To program the set to forward all calls to an external number:
.
.
.
.
.
Press
SuperKey.
Press the No softkey until CALL FORWARDING? appears in the dis-
play.
Press the Yes softkey. The display shows the current forwarding type
and destination, if programmed.
Press the
Change
softkey.
Press the
Program
softkey.
Press the No softkey until the desired type of call forwarding appears
in the display.
Press the Yes softkey.
Enter the destination number, or press a SPEED CALL key on the
SUPERSETtelephone or associated SUPERSET DSS Module. If an
invalid number is entered, the display shows INVALID NUMBER. Use
the + softkey to back space and erase the entry.
Press the
Save
softkey. The type of forwarding, the forwarding desti-
nation, and an * appear momentarily in the display. The display then
returns to showing the date and time. Call Forwarding is now pro-
grammed and enabled.
Note:
The asterisk indicates that Call Forwarding is enabled.