Mitel SX-200 Practices page 179

Features
SUPERSET 4
DN and SUPERSET Telephones:
To display the current forwarding type and destination:
.
Press
SuperKey.
Find the
Forwarding
softkey. (Use the More softkey).
Press the
Forwarding
softkey. The display shows the current forward-
ing type and destination, if programmed.
Press
SuperKey
to return to normal display.
To activate Forwarding already programmed:
<
l
Press the
Turn FWD On
softkey. cFWD ON> appears in the upper
right corner of the LCD.
To deactivate Forwarding:
l
Press the
Turn FWD Off
softkey. <FWD ON> disappears from the dis-
play.
To Set Up Call Forwarding - External:
e
.
.
.
Press
SuperKey.
Find the
Forwarding
softkey. (Use the More softkey).
Press the
Forwarding
softkey. The display shows the current forward-
ing type and destination, if programmed.
Press the
Change
softkey. Softkeys appear for the types of forwarding
enabled in the set' s COS. This only applies if Split Forwarding is dis-
abled.
Select the required type. The display requests the destination number.
Enter the destination number, or press a SPEED CALL key on the
SUPERSETtelephone or associated
SUPERSET DSS
Module,. If an
invalid number is entered, the display shows INVALID NUMBER. Use
the t- softkey to back space and erase the entry. Enter the correct
number (can be a speedcall key, if programmed) or press the
Current
No.
softkey to restore the previously programmed destination, (if avail-
able).
Press the
Save/On
softkey. The display returns to normal. <RND ON>
appears in the top right corner. If Split Fotwarding is enabled, the
Sa-
ve/Off
softkey is also available.
9109-096-l 054A
Issue 1 Revision 0 105 2-107