Mitel SX-200 Practices page 152

Features Description
Industry-standard and
SUPERSET 407
Telephones:
To set up Call Forwarding - Busy:
l
Lift the handset-wait for dial tone.
l
Dial the access code for Call Forwarding - All Calls.
l
Dial the Condition code for the desired type of forwarding.
9
Dial the number to which calls are to be forwarded.
l
Dial tone returns.
9
Hang up -the extension is available for normal use.
To cancel Forwarding (all types):
Lift the handset - wait for dial tone.
Dial Call Forwarding -All Calls feature access code.
Hang up - the forwarding is canceled.
or
Lift the handset-wait for dial tone.
Dial the Clear All Features access code (see Clear All Features). This
also cancels all forwarding at the telephone.
SUPERSET 3
Telephones:
To program Call Forwarding - Busy:
. Follow the same procedure as for industry-standard telephones; it is
also possible to dial the codes and extension destination directly on
the keypad and then press the
Speaker On/Off
key to go on-hook.
SUPERSET 3
DN and
SUPERSET
Telephones:
To program Call Forwarding - Busy:
105 2-80
l
Follow the same procedure as for industry-standard telephones; it is
also possible to dial the codes and extension destination directly on
the keypad and then press the
Speaker On/Off
key to go on-hook.
To activate or deactivate Forwarding already programmed:
. Press the CALL FORWARD feature key, if programmed. The LCD indi-
cator is dark (activated) to indicate forwarding active, clear to indicate
not active.
SUPERSET 4
Telephones:
To display the current Forwarding type and destination (split forwarding
disabled):
l
Press the DISPLAY key.
Revision
0 9109-096-l
05-NA
Issue
1