Mitel SX-200 Practices page 608

Tenanting
TENANT1
TEN4tdT2
Figure 2-2 Tenant Interconnection with Shared Console
-Identifying Tenants on Consoles and SUPERSET Telephones
2.j Attendant consoles or SUPERSETtelephones may be programmed to provide a
common answering point for incoming calls to all tenants, as well as calls that are
unanswered by any tenant. Each tenant may not call the other tenants or access
each other's trunks, but all of their calls will be directed to the common answering
point. The incoming calls may be DID, DIL, or regular CO trunks.
When recalls are answered at a common answering point, the name of the tenant that
did not answer is displayed as a NO ANSWER so that the recall may be answered with
an appropriate response. If the called party has a SUPERSET4, SUPE/?SET4"DN,
SUPERSET420" or SUPERSET430" telephone, that party's name is displayed. The
calling party's trunk group may be programmed to display the company name. If the
trunk has not been programmed with a name, the trunk group name is displayed. If the
trunk group has not been programmed with a name, the trunk number is displayed.
230 2-4
Revision
0 9109-096-23O-NA
Issue
1