Mitel SX-200 Practices page 205

Features
When the Attendant or a SUPERSET or SUPERSET DN telephone
calls an extension that is forwarded to an external number, the display
shows the external number and indicates the extension which for-
warded the call. If the Speed Call or Abbreviated Dial number is
private, text indicating a private number appears on the display instead
of the external number. The Console can display the number if it has
COS Option 110 (Attendant Abbr. Dial Confidential Number Display)
enabled in its COS.
Consoles and extensions can transfer a party on consultation hold as
soon as forwarding to an external number starts, at any point in dialing
the external number.
;
The reference is to the stored Speedcall key number or the Abbre-
viated Dial number. If this stored number is changed, then the
forwarding destination changes also.
Programming
Enable COS Option 208 (Call Forwarding - External) in the extension' s
cos.
Enable COS Option 245 (Abbreviated Dialing Access) for the extension to
allow forwarding to system Abbreviated Dial numbers.
Enable System Option 21 (Incoming to Outgoing Call Forward) to allow
trunks to be externally call forwarded.
Operation Operation varies depending upon the type of telephone as described be-
low.
Industry-standard Telephones:
9109-096-l 05-NA
Issue 1
To set up Call Forwarding - External at an Extension:
Lift the handset - dial tone is heard.
Dial the Call Forwarding Access Code.
Dial the Abbreviated Dial Access Code.
Dial the Abbreviated Dial Index Number, which contains the external
telephone number to which calls are to be forwarded. Dial tone is re-
turned if the above codes are valid; reorder tone is returned if the
codes are invalid.
Replace the handset; Call Forwarding - External is now active.
To cancel Call Forwarding - External at an Extension:
Lift the handset - dial tone is returned.
Dial any Call Forward access code.
Replace the handset - External Forwarding is now inactive.
or
Revision
0 105 2-133