Mitel SX-200 Practices page 149

Features
.
.
.
_
.
.
No forwarding is done if the caller is the Attendant, and the forwarding
destination is the Dial 0 Access Code.
If the extension is a member of a Hunt Group and has forwarding en-
abled, the extension will still be rung if called via the hunt group (its
immediate forwarding is ignored, except for Call Forward - No An-
swer). If it is called directly, its forwarding is honoured.
With Split Forwarding disabled, only one type of forwarding may be
active at an extension at any time: if an extension has one type of for-
warding active and the user enters a new forwarding type, the first
type of forwarding is canceled. With Split Forwarding enabled, there
can be two destinations; one for internal calls, and one for external
calls.
Forwarding must be enabled in the set' s COS. The different types of
forwarding are enabled separately; see Programming.
With multihop forwarding, calls may be forwarded twice (maximum) on
any combination of conditions.
When forwarding to a speedcall or abbreviated dial number, the for-
warding always occurs regardless of the outcome of the call, unless to
an illegal forwarding destination, in which case forwarding is ignored.
For example, if Toll Control denies access to an external number or
the forwarding is to an invalid number, no forwarding occurs. For for-
warding to a personal speedcall key, the contents of the key are
examined as per the validity of forwarding; if unsuitable, the forwarding
is de-programmed and no forwarding occurs.
SUPERSETtelephone key or multicall line appearances of extension
numbers do not ring or provide visual indication of incoming calls if the
extension has activated Forwarding - Follow Me or Forwarding -
Busy, if the caller is actually forwarded.
Forwarding is not done if the forward destination is busy (it is busy if:
Do Not Disturb is activated, it is not idle, or its prime line appearance is
not idle), An exception is for Subattendant SUPERSETtelephones and
enhanced answering positions. In these cases, the SUPERSETtele-
phone is considered busy if there are no idle appearances of its prime
line or multicall appearances of itself; see Enhanced Answering Posi-
tion (Generic 1004/GenericlOO5).
When Call Forwarding - Follow Me is activated, calls are always for-
warded, even if the forward destination is busy.
If the SUPERSETtelephone being forwarded to has the Auto-Answer
feature activated then the caller is answered with that feature; see Au-
to-Answer.
Connection checking is done between the calling party and the party
being forwarded to; see Device Interconnection Control.
If forwarding is activated but for some reason the forwarding is not
done, the call continues as if forwarding was not active. If the call for-
9109-096-l 054A Issue 1
Revision 0 105 2-77