Mitel SX-200 Practices page 266

Features Description
- a data station or a data hunt group where the programmed default
modem pool hunt group is selected
or,
- a modem pool hunt group access code for
DTRX
access.
Transferring a Modem Pooling Call (Incoming/Internal Call On Hold)
.
.
.
The transferor must have COS Option
704
(Incoming/Internal Modem
Pooling Access) enabled; the transferor can be a station, SUPERSET
telephone,or a console.
Dial:
Data Station or Data Hunt Group access code (where default
modem pool hunt group is selected,if programmed)
or,
Modem Pool Hunt Group access code for DTRX access
or,
Modem Pool Hunt Group access code plus Data Station or Data
Hunt Group access code.
Once the call is set up successfully, the pooled modem returns answer
tone.
When answer tone is heard, transfer the call as follows:
- press RELEASE key at console
or,
- press RELEASE softkey or hang up at a SUPERSET telephone
or,
- press RELEASE ME softkey or hang up at a SUPERSET DN,
SUPERSET 420, or SUPERSET 430 telephone.
or,
- hang up at an industry-standard telephone, a SUPERSETB
telephone, a SUPERSET 3 DN telephone, a SUPERSET 401
telephone, or a SUPERSET telephone.
To cancel the modem pooling call setup, proceed as follows:
105 2-194
press CANCEL key at console
or,
press CANCEL softkey at a SUPERSET 4 telephone
or,
press BACK TO HELD softkey at a SUPERSET DN telephone,
a SUPERSET 420 telephone, or a SUPERSET 430 telephone
or,
press the
TrandConf
key at a SUPERSET DN telephone or a
SUPERSET 410 telephone
or,
press the
Flash
key at a SUPERSET 401
Revision 0
9109-096-I 05-NA
Issue 1