Mitel SX-200 Practices page 247

Features
Programming
Operation ADL
If Verified Account Codes are to be used, enable System Option 05 (Veri-
fled Account Codes) in CDE Form 04 (System Options/System Timers);
enter the required Account Codes into CDE Form 33 (Account Code
Entry).
Set System Option 55, (44 in Generic 1001) Account Code Length in CDE
Form 04 (System Options/System Timers) to a value between 4 and 12, or to
VARIABLE.
To require account code entry on internal ADL or DTRX data calls, enable
COS Option 326 (Account Code Forced Entry - Data Internal Calls) for the
originating dataset.
To require account code entry for incoming or internal modem pooling calls,
enable COS Option 326 (Account Code, Forced Entry- Data Internal Calls)
in the COS for the Pooled Modem.
Enable one of the following options in the COS form for the originating data
device, as required, for outgoing calls:
- COS Option 327 (Account Code, Forced Entry - Data External Calls)
- COS Option 328 (Account Code, Forced Entry - Data Long Distance
Calls).
Disable COS Option 700 (SMDR - Does Not Apply) in the Class of Service
form for the data device.
Enable COS Option 808 (Special DISA) (810 in Generic 1001) in the COS for
the data device.
Disable COS Option 906 (Data SMDR - Does Not Apply) in the originating
data device' s Class of Service for ADL or DTRX calls.
To record incoming calls, enable COS Option 806 (SMDR - Record
Incoming Calls).
For incoming and internal modem pooling calls, disable COS Option 906
(Data SMDR - Does Not Apply) in the originator' s pooled modem' s Class of
Service.
From the set:
. Dial the ADL access code.
0 Dial the Account Code access code.
l
Dial the Account Code.
l
Dial the destination.
9109-096-105-NA Issue1
Revision
0 105 2-175