Mitel SX-200 Practices page 741

Programming Hotel/Motel
Call Blocking
Feature Description:
Reference page 602 2-36,
User Information:
Console: Chart 5-6; Front Desk Terminal: None; Telephones: None.
Chart 4-11 Programming Call Blocking
Nqtes: 1. This feature allows the attendant to inhibit room-to-room calls by activating call
blocking from the console. Calls to the attendant or to extensions without the call
blocking COS option selected may be made as usual. The system treats attempted
calls between restricted extensions as illegal numbers and gives the calling party
reorder tone. Alternatively, call rerouting can be used to intercept blocked calls to an
appropriate destination such as the attendant console.
2. Tenanting does not apply to the operation of this feature. All consoles with the feature
enabled can enable or disable Call Blocking throughout the system,
3. For all consoles with the feature enabled, the LED associated with the Block hardkey is
updated each time call blocking is turned on or off. When the LED is on, call blocking is
enabled, The key and the LED are not operational if the feature is not enabled.
4. If Call Rerouting is to be used, blocked calls are treated as Station Illegal Number
Routing.
Step Action Comments
Form 03
1.
Enable COS option 113 (Attendant Call
Block Key) for the attendant console which
can apply call block.
Enable COS option 204 (Call Block Applies)
for the extensions to which call block will
wN
Form 04
2. Enable System Option 09 (Attendant Call
Block).
9109-096-602-NA
Issue 1
Revision 0
602 4-21