Mitel SX-200 Practices page 157

.
Features
Industry-standard and SUPERSET Telephones:
To set up Call Forwarding - Busy/Don' t Answer:
l
Lift the handset - wait for dial tone.
.
.
To
.
.
Dial the access code for Call Forwarding - All Calls.
Dial the Condition code for the desired type of forwarding Busy/No An-
swer.
Dial the number to which calls are to be forwarded.
Dial tone returns.
;
Hang up - the extension is available for normal use.
cancel Forwarding (all types):
Lift the handset - wait for dial tone.
Dial the Call Forwarding -All Calls access code.
Hang up -the forwarding is canceled.
or
Lift the handset-wait for dial tone.
Dial the Clear All Features access code (see
Clear
A//
Features). This
also cancels all forwarding at the telephone.
SUPERSET
Telephones:
To select Call Forwarding - Busy/Don' t Answer:
l
Follow the same procedure as for industry-standard telephones; it is
also possible to dial the codes and extension destination directly on
the keypad and then press the
Speaker On/Off
key to go on-hook.
SUPERSET DN
and SUPERSET470Telephones:
To set up Call Forwarding - Busy/Don' t Answer:
l
Follow the same procedure as for industry-standard telephones; it is
also possible to dial the codes and extension destination directly on
the keypad and then press the
Speaker On/Off
key to go on-hook.
To activate or deactivate Forwarding already programmed:
l
Press the CALL FORWARD feature key, if programmed. The LCD indi-
cator is dark (activated) to indicate forwarding active, clear to indicate
not active.
SUPERSET Telephones:
To display the current Forwarding type and destination:
l
Press the DISPLAY key.
9109-096-l
054A
Issue
1
Revision
0 105 2-85