Mitel SX-200 Practices page 228

Features Descridion
Clear All Features
Description
Conditions
Programming
Operation
An extension user may cancel all Call Forwarding, Do Not Disturb, and
Callbacks active at that extension.
None.
Enable COS Option 221 (Clear All Features) for the extension,
Assign an Access Code to Feature 25 (Clear All Features).
To cancel all Call Forwardings, Callbacks, and Do Not Disturb:
Lift the handset - dial tone is returned.
Dial the Clear All Features feature Access Code.
Dial tone is returned.
Replace the handset.
Conference
Description
This feature allows a set user to establish a conference of up to five par-
ties (including the originating extension), without the assistance of the
Attendant.
See Device lntercunnection Control for information on controlling trunk
conferencing, and Attendant Conference.
- Conditions
The following conditions apply to this feature:
105 2-156
A maximum of six conferences may take place at one time; the maxi-
mum number of conferees permitted at one time is 18; the maximum
number of conferees permitted in one conference is 5.
An Attendant console cannot be a member of a set-lnitiated confer-
ence.
Only one party may flash out of the conference at a time.
An extension with COS Option 203 (Broker' s Call) or 252 (Broker' s
Call With Transfer) (250 - Transfer With Privacy in Generic 1001) en-
abled cannot set up a conference. The switch-hook flash is interpreted
as a SWAP and not as a conference attempt.
A non-busy extension forms conferences automatically.
Revision
0 9109-096105-NA Issue 1