Mitel SX-200 Practices page 176

Features Description
or
Lift the Handset - dial tone is returned.
Dial the Clear All feature access codes
Replace the handset.
-
Dial tone is returned.
SUERSET Telephones:
To select Forwarding - External:
9 Follow the same procedure as for industry-standard telephones; it is
also possible to dial the codes and extension destination directly on
the keypad and then press the
Speaker On/Off
key to go on-hook.
SUPERSET
DN and SUPERSET Telephones:
To set up Forwarding - External:
l
Follow the same procedure as for industry-standard telephones; it is
also possible to dial the codes and extension destination directly on
the keypad and then press the
Speaker On/Off
key to go on-hook.
To activate or deactivate Forwarding already programmed:
l
Press the CALL FORWARD feature key, if programmed. The LCD indi-
cator is dark (activated) to indicate forwarding active, clear to indicate
not active.
SUPERSET
Telephones:
To display the current Forwarding type and destination:
Note:
If
Split Forwarding is enabled, press the NEXT softkey to examine settings for
internal calls.
105 2-104
l
Press the DISPLAY key.
l
Press the CALL FWD softkey - read the display.
9 Press the EXIT softkey.
To activate Forwarding already programmed:
.
.
.
Press the SELECT FEATURES key.
Dial 1 (feature number 1 is Forwarding (1 :FWD)) -the current type
and destination are displayed.
Press the ON softkey to activate forwarding; if activation is not de-
sired,press the EXIT softkey.
Forwarding is now active; the word FWD is displayed in the top left corner of
the LCD as a reminder.
Revision 0 9109-096-I 05-NA
Issue 1