Mitel SX-200 Practices page 628

Traffic Measurement
Msg Waiting:
Applied message waiting, from any source in any manner.
,
Override:
Completed busy overrides.
Paging:
Successful pager accesses.
Serial Call:
Console serial calls set up by all consoles.
TAFAS:
TAFAS (night answer) answered from dialed feature access code or
SUPERSET
softkey.
Wake-Up:
Call wakeup set-ups.
UCD Loginout:
UCD agent logins and logouts.
DTMF Receivers
- Records activity on receivers within system (maximum peg count
= 65535). The following counts are recorded:
Peg:
The total number of times that the DTMF receivers were accessed during
the measurement period.
Usage:
Represents the total usage (Erlangs or CCS) for the DTMF receivers
during the measurement period. Does not include busiedout receivers
(maximum = 6553.5 0x4).
Busy Peg:
The number of times a call could not immediately be allocated a
DTMF receiver due to busy conditions.
Maximum in use/Available:
The scanned maximum count of the number of
receivers in use during the period and the number that are available for use,
Does not include busied-out receivers.
Channel Usage And Local Switching
- Records activity between bays and within
each peripheral bay. The following counts are recorded:
Bay Number:
Identifies the bay for which data is being accumulated.
Channel Usage:
Usage of channels available to the bay. Does not include
channels allocated for music or tones (maximum = 6553.5 ccs).
Max Channel/Available:
The scanned maximum number of channels in use
and the number available for use. Does not include channels allocated for music
or tones.
Local Switching Usage:
Usage of analog peripheral bay local switching
(maximum = 6553.5 ccs).
Max Local Switching:
The scanned maximum number of local switches found
in an analog peripheral bay.
450 2-4 Revision 0 9109-096-45O-NA issue 1